1. the structure of the machine is symmtrical 3-roll, two lower
rolls are symmetrical central location, so it is convenient for
machine vertical movement.
2. the machine is started bu manually under pressure, and then the
two rollers rotates through the output gear reducer with roller
3. the machine is cheaper than the traditional one, and the
structure is simple and easy for operation.
4. the machine is cost-effective, and has long performance life.
--MCLW11STNC- Structural characteristics of equipment
1), rolling barrel straight and high, set on a drum roll, with
roller adjustment, from sheets to heavy plate rolling this range
can be a high degree of linear products, to ensure that the next
process is carried out smoothly welding to ensure the quality of
2) using the rear bending process, eliminate curved front post horn
is produced, products roundness.
3), the material ends direct pressurizing the pre-bend very easily
and effectively control the shape of the remaining straight edge.
★ The device is equipped with a lubricating device. Lubrication
system for each movable joint member has a centralized lubrication
system lubrication system is reliable and can work at ambient
temperature (45 ° or less), high humidity (95%).
★ integrated racks, base made of high quality steel Q235B welded
components, have sufficient strength and rigidity.
★ work rolls using two approaches: first quenching strength of the
work rolls HB260-300; then the work rolls quenching hardness
HRC50-55, the work roll is detected using two standard testing, the
work roll is 42CrMo forging blank.
★ equipped with electronic synchronization system when moving up
and down on a roll, synchronous balance compared, and no end of
work balance is not prone to the wrong side, easy operation, high
volume manufactures precision.
★ equipment control system uses the remote service monitoring
system. The user can use equipment and production facilities and
services twenty-four hours tracking, promptly address and resolve
equipment problems to ensure uninterrupted device is working
properly. (Requires optional)
|MCLW11S upper roller universal plate rolling machine technical
|Model||Max Pre-bending thickness(mm)||Max bending thickness(mm)||Diameter of the upper roller(mm)||Max plate width(mm)||Main motor power(kw)|