1. Automatic the material. The plate on the roll immediately to
align the plate automatically.
2. The roller accurately in tangent location and clamping plank,
get the shortest straight length (excellent pre-bending function).
3. Once completed. The whole barrel through a rolling can complete,
including at the ends of the plate bending. Only need to determine
lateral roll position, for automatically, without plate.
4. Plank. Plank always holding in two between the upper and lower
roller, to ensure the consistent and ideal location.
5. Auxiliary equipment. For, bending and rolling are centralized
control. It can realize fast security bending, and the plate edge,
no damage; Condition of material device, can eliminate the wrong
side of rolling process. The carrier is rolled with large diameter
cylinder, set up by the alternative overhead lifting equipment with
rolled plate. This set of auxiliary device can greatly improve the
efficiency of rolled plate more than 2 ~ 3 times.
6. Cones. Four high geometric design help rolled cones, and due to
the lower roller can tilt clamping plank after edge () in the cones
of large diameter end, can make the side plate during rolling into
quickly. "cones rolling device" keeled over on the side, with the
plank of the short side (in the cone tube small diameter end)
contact, according to the forming size slight rotation, make this
side of the plate in the process of rolling into the speed slow
down slightly. Side roller must tilt, appropriate to cones in the
correct geometry shape.
Mertal standard configuration of four roller plate bending rolls,
the roller clamping positioning and side roller adopt the
electronic control system, its level is much higher than the same
7. The application of CNC. Four roller is the most suitable CNC
machine programming: fast automatic sheet for: with reliable
"starting point" as a mechanical reference point, are most suitable
for CNC programming. Hydraulic clamping roll clamping plank, always
make sure to send into the stability, accuracy and positioning
plate. A single rolling process: simply by CNC programming.
Following users apply to use the machine
first use of the user, because this is one of the most
operators lack of inspection requires high productivity,
increase profitability requires high accuracy,
improving quality want only one operator, reducing labor costs
due to the large size of the Board, production of high-or for
security reasons require handling device
want to use CNC operations, reduce operational personnel action
levels think factor
Double nip roller full drive as standard features -
coiling process in the pre-bending of the sheet securely clamped,
completely avoid slipping phenomenon.
Dual roller drive ensure more stable and reliable gripping, edge of
the sheet can be closer to the nip point.
The sheet edge closer to the nip point, this is the best place to
get the shortest length of the straight edge.
After the completion of the pre-bent, we need to continue to move
the sheet coiled. Full upper and lower rollers driven approach,
from both sides of the sheet holder feeding, feeding clamping force
distribution in the double-sided sheet, ensure a more accurate feed
Further explanation, the upper and lower rollers synchronous
movement, ensures that when rolled sheet and narrow strip when feed
reliable and stable.
- Each independent drive rolls on straight league by hydraulic
Every driver on the roll of straight league by hydraulic motor,
ensures that the plate to the stable and reliable. Direct mode was
the standard characteristics of heavy equipment, torque can be
directly sent to board, avoid the power loss.
High efficiency and energy saving technology --
Low efficiency of the system (speed reducer, copper sleeve, gear
belt, cardan shaft, linear guide) is replaced by a new efficient
method, hydraulic planetary drive coupling on the roller directly,
frictionless swing guide rail, frictionless autocollimation
bearing, multiplex hydraulic power system. The application of
today's most advanced technology greatly reduce the energy loss
(useless) to ensure energy is used for coil plate (useful work).
Completely conform to the international standard for efficient
Other manufacturers on the market of plate bending rolls, drive
roller is only on the roller, the production sheet or narrow board,
under the roller relative to the top roller pressure, usually
produce skid too low, too high usually material deformation, such
as such and such problems. Moreover, they usually device adopts
gear box or the structure of the friction wheel, transmission
efficiency is low, waste energy loss is very big.